| 819 Scraper Specifications |
The 819 is standard with the heavy cast 360 swivel Quickhitch. Also, standard are
hydraulically operated disc brakes. The tractor must have the brake option to operate the
scraper brakes. Two 29.5X25 tires on the rear of the scraper with 3 ½” axles.
The 819 is front lowering with two 5 ½” inch cylinders and the gate is controlled by a 6X22
inch cylinder. Eject is a 5X40 inch hydraulic cylinder. The 819 is equipped with ¾ inch
hydraulic hoses. Hydraulic operation is two valve syncro-sequencing.
The 819 weighs 27,500 lbs. empty and can only be shipped one per truck. The machine
has a 10 ft. cut and a narrow transport overall width of 10 ft. 11 inches. The length is 30 ft.
6 inches. Overall height is 7 ft. 5 inches and has a max capacity of 19 cubic yards.
The 819 utilizes double wall construction on the sides with 80,000 yield and T-1 high
tensile steel where extra strength is required. Reversible cutting bits are standard. An
operator site gauge is on the center of the hitch of each scraper.
The 819 Warranty is for six months from the date of sale, lease, or rental when pulled
behind a rubber track or rubber tire tractor with a maximum 600 engine horsepower. A
push block is standard with a fixed rear hitch for a tandem scraper set up. Due to extreme
variables involved with push loading, ICON will not Warranty damage occurred while
pushing
hydraulically operated disc brakes. The tractor must have the brake option to operate the
scraper brakes. Two 29.5X25 tires on the rear of the scraper with 3 ½” axles.
The 819 is front lowering with two 5 ½” inch cylinders and the gate is controlled by a 6X22
inch cylinder. Eject is a 5X40 inch hydraulic cylinder. The 819 is equipped with ¾ inch
hydraulic hoses. Hydraulic operation is two valve syncro-sequencing.
The 819 weighs 27,500 lbs. empty and can only be shipped one per truck. The machine
has a 10 ft. cut and a narrow transport overall width of 10 ft. 11 inches. The length is 30 ft.
6 inches. Overall height is 7 ft. 5 inches and has a max capacity of 19 cubic yards.
The 819 utilizes double wall construction on the sides with 80,000 yield and T-1 high
tensile steel where extra strength is required. Reversible cutting bits are standard. An
operator site gauge is on the center of the hitch of each scraper.
The 819 Warranty is for six months from the date of sale, lease, or rental when pulled
behind a rubber track or rubber tire tractor with a maximum 600 engine horsepower. A
push block is standard with a fixed rear hitch for a tandem scraper set up. Due to extreme
variables involved with push loading, ICON will not Warranty damage occurred while
pushing
……………………………………………………………………………………………… ICON reserves the right to change design, models, specification, and/or pricing without notice or obligation |
 |  |  |  |
